See also the TEC076 PORTABLE DVD/MP3
KARAOKE SYSTEM with VHF RADIO MICROPHONES
POWERPOD K-12
1000W 12-Ch Powered Mixer with Graphic EQ, Dual DFX
| 500W + 500W output power |
| Low cut filters, 3-band channel EQ with swept
mid-range and four AUX sends |
| Stereo 10-band graphic EQ |
| 16 high-definition digital effects
|
| Moulded protection cover |
| Less weight achieved by switching power
supply |
Powerpod K-Series powered mixers are compact and
versatile with 14 or 16 mono Mic/Line and stereo inputs. They have
built-in power stereo amplifiers with selectable output up to 500
watts per channel. The onboard dual 24-bit digital effects
processors come with 16 preset programs, main parameter control,
tap control and foot switch jacks. A 3-band EQ on every channel
and stereo 10-band graphic EQ give you maximum control over your
mix. The added feature of Mini Stereo I/O make these mixers
perfect for anyone connecting MP3, MD, computer audio or recording
devices. Weight has been dramatically reduced with the new
high-efficiency switching power supply. The light-weight
construction, rugged metal chassis, integrated handle and durable
cover combine to make this an ultra-powerful highly-portable
all-in-one mixer/amplifier. Extra features of the Powerpod K-16
include feedback detection, vocal eliminator for use in karaoke,
and sPs mix enhancer. Powerpod K-Series powered mixers are ideal
for use in clubs, houses of worship, convention halls, school
auditoriums, and boardrooms.
Features :
| 500W + 500W / 4 Ohms stereo power amplifier
(bridgeable and patchable) |
| Dual DFX, our 24-bit digital multi-effect
processor with 16 programs plus one main parameter control, tap
control and foot switch jack |
| 10 balanced Mic inputs (8 with inserts)
|
| 12 Line inputs |
| Two stereo Line input channels |
| 3-band channel EQ with swept mid-range
|
| Stereo 10-band graphic EQ |
| Four AUX sends (AUX 2 can be set to pre- or
post-fader) |
| Two stereo returns - each can be routed to
AUX 1 & 2 sends (effect to monitor) |
| Mini Stereo I/O and stereo RCA I/O
|
| +48V individual phantom power switches
|
| Mono output with variable low pass filter
from 60 Hz up to 160 Hz |
| PFL on each input and AFL on each output
|
| Standby switch for playing music between sets
|
| Zone 2 output for side fill or another PA
system |
| Headphone output with separate rotary level
control |
| One Speakon-AR-type connector and two 1/4"
phone jacks per channel for speaker connection |
| Moulded protective cover prevents scratching
or damage to mixer |
| Rugged metal main chassis with integrated
handle |
| Less weight achieved by high-efficiency
switching power supply
|
|
|
POWERPOD 1860 DELUXE
800W 12-Ch Powered Mixer w Graphic EQ, DFX
| 400W + 400W output power |
| Low cut filters, 3-band channel EQ and four
AUX sends |
| Stereo 10-band graphic EQ |
| 16 high-definition digital effects
|
| Moulded protection cover |
| Less weight achieved by switching power
supply |
| Mixing units for use in sound recording |
The Phonic Powerpod Deluxe Series are powered
mixers in a compact and durable moulded cabinet. Each Powerpod
Deluxe has a built-in stereo amplifier which is bridgeable and
power can be directed to select outputs. Super Hi-Z inputs allow
for the addition of guitars and other instruments. The mixers
feature onboard DFX, our 24-bit digital effects processors with 16
preset programs. The 3-band EQ on every channel and dual
multi-band graphic EQ with selectable In/Out switches give you
maximum control over your mix. The added feature of Mini Stereo
I/O make these mixers perfect for anyone connecting MP3, MD,
computer audio or recording devices.
Features :
| 400W + 400W / 4 Ohms stereo power amplifier
(bridgeable and patchable) |
| DFX, our 24-bit digital multi-effect
processor with 16 programs plus one main parameter control, tap
control and foot switch jack |
| 10 balanced Mic inputs (8 with inserts)
|
| 12 Line inputs |
| Two stereo Line input channels |
| 3-band channel EQ |
| Stereo 10-band graphic EQ |
| Four AUX sends (AUX 1/2 are pre-fader and EFX
1/2 are post-fader) |
| Two stereo returns, each can be routed to AUX
1 & 2 sends (effect to monitor) |
| Mini Stereo I/O and stereo RCA I/O
|
| +48V individual phantom power |
| Mono output with variable low pass filter
from 60 Hz up to 160 Hz |
| PFL on each input and AFL on each output
|
| Standby switch for playing music between sets
|
| Zone 2 output for side fill or another PA
system |
| Headphone output with separate rotary level
control |
| One Speakon?-type connector and two 1/4"
jacks per channel for speaker connection |
| Molded protective cover prevents scratching
or damage to mixer |
| Rugged metal main chassis with integrated
handle |
| Less weight achieved by high-efficiency
switching power supply |
| Mains power switchable between 115 VAC and
230 VAC
|
|
|
POWERPOD 740 DELUXE
440W 7-Channel Powered Mixer with DFX
| Dual 7-band graphic EQ |
| 16 high-definition digital effects |
| Mini stereo and stereo RCA I/O with trim
control for digital media |
| Rumble filters and phantom power supply |
| Switchable Mains power between 115VAC and
230VAC |
| Less weight achieved by switching power
supply |
The Phonic Powerpod Deluxe Series are powered
mixers in a compact and durable molded cabinet. Each Powerpod
Deluxe has a built-in stereo amplifier which is bridgeable and
power can be directed to select outputs. Super Hi-Z inputs allow
for the addition of guitars and other instruments. The mixers
feature onboard DFX, our 24-bit digital effects processors with
16 preset programs. The 3-band EQ on every channel and dual
multi-band graphic EQ with selectable In/Out switches give you
maximum control over your mix. The added feature of Mini Stereo
I/O make these mixers perfect for anyone connecting MP3, MD,
computer audio or recording devices.
Features :
| 220W + 220W / 4 ohm stereo power amplifier
for Main L/R or Main/Monitor (Bridge mono, 440W / 8 ohm) |
| 24-bit digital multi-effect processor with 16
programs plus foot switch jacks |
| Seven balanced Mic inputs |
| 10 Line inputs |
| Two super Hi-Z inputs optimized for direct
instrument input |
| 3-band channel EQ |
| Dual 7-band graphic equalizers with In/Out
switches for Main L/R or Main/Monitor |
| Rumble filters for Mic inputs |
| Pad control on channels 1-4 |
| One AUX input |
| Monitor and effect sends on each input
channel |
| Mini Stereo I/O for digital media |
| +48V phantom power |
| Two built-in limiters |
| Rec out with trim control for record level
matching |
| Mains power switchable between 115 VAC and
230 VAC
|
|
|
POWERPOD 408
80W 4-Channel Powered Mixer with Variable Delay
| 80W output power |
| 4 Mic/Line channels |
| Variable digital delay with time and repeat
control |
| Amplifier power assignable with additional
1/4" stereo jack |
| Super musical 2-band EQ on mono channels |
The Phonic Powerpod Series are powered mixers
in a compact and durable design. Each Powerpod mixer has
multiple Mic/Line input channels and a built-in amplifier. The
2-band EQ on every channel gives you maximum control over your
mix. The Powerpod 408 is equipped with built-in variable digital
delay. Extra features of the Powerpod 620 are onboard 24-bit
digital effects processor, 7-band graphic EQ and Super Hi-Z
inputs for the addition of guitars and other instruments.
Powerpod Series powered mixers are great all-in-one
mixer/amplifiers for bands, traveling musicians, school
auditoriums, houses of worship and clubs.
Features :
| Built-in 80 Watt power amplifier |
| 4 mic/line input channels |
| Variable digital delay |
| XLR and 1/4" TRS phone input jacks
|
| Super musical 2-band EQ at mono channels
|
| Additional 1/4" stereo jack for external
signal to use the built-in power amplifier and sending Main
output to external power amplifier |
| Tape In and Record out for CD or tape player
|
| Two 1/4" phone jacks for speaker connection
|
| Rugged wooden box with carpet protection
|
|
|
POWERPACK 408
Powerpod 408 + Two 10" Speakers + Mic + Cables
| 80 Watts stereo powered mixer with variable
digital delay |
| Two 10" stage/floor monitor speakers with
built-in crossover |
| One dynamic microphone |
| Includes all the cables you need |
Hit the road with the Powerpack Series. This
mobile PA system is fully outfitted and ready to go. It comes with
the popular Powerpod 408 Powered Mixer, a 4-Channel Mic/Line mixer
with high-quality Variable Digital Delay effects, and two 10"
Phonic SEM 710 speakers and a Phonic dynamic handheld microphone.
Features :Complete
PA Package include
| One Powerpod 408 powered mixer |
| Two SEM 710 2-way 10" stage speaker
|
| Two 20 ft speaker cable |
| One microphone with clip and cable (20 ft)
|
|
Mono input-channel
|
MD 10•14 – Compact 19"
mixing desk with integrated effect unit
Our MD 10.14 has all the features that
one could wish from a real-world mixing console in this size:
• 10 input channels total , 4 in stereo
• Excellent sounding built-in effect unit with storable presets
• Various EQ possibilities in input, master and monitor section
• 2 aux busses, 1 internal effect bus
• Integrated power supply
• Headphone output, PFL, Low Cut, phantom power supply
and much more. |
Stereo input-channel
|
|
|
DYNACORD MP7
| Entertainment
System - breaks all limits
| The brand new DYNACORD
MP7, which for the first time addresses
numerous sound problems in
entertainment, gastronomic, and
industrial applications, as well as in
the permanent installation and
contractor business. |
| Closing
a gap that existed for quite a long
time, the MP7 incorporates all the
features that formerly were available
only through individual components. |
| The
MP7 is extremely compact and flexible
and with its modern design suitable for
mobile or permanently installed
applications (19"-adapter and
wall-brackets are optionally available). |
| The
DYNACORD MP7 employs mixer, power amp,
and equalizer in a single enclosure.
Additionally, it houses two stereo
FX-units, 7-Band Master Equalizer and
three microphone channels offering extra
Low Cut Filters and 3-Band Equalizer.
Four Line channels allow the connection
of i.e. CD-Players
and turntables. An “Assignable
Transition Fader” allows cross fading
between individual channels. The
integrated processor power amplifier
provides an output power capacity of 2 x
300 W. Additional features are: PFL
function, Signal/PEAK indication for
each channel, two phones jacks and
stage-lit light. |
| DYNACORD
MP7 is the perfect solution for all
non-live-act applications. Its unique
features stand as equivalent for cost,
time and space-saving operation. |
|
|
Power,
Effects, Extras -high performance & compact size
| 2 x 300 W, 8 Ohms
|
| Protection |
| LPN Filter |
| Speakon Sockets
|
| Doubling Effects
|
| Easy programmable presets
|
| 18-bit digital effect processor
|
| Studio Quality Effects
|
| 2 x 99 Presets
|
| Robust and lightweight metal case
|
| 6 Mic/Line Inputs , 2 Stereo inputs
|
| Stand-by function
|
|
|
|
|