|
Sx300 - €995.00
"the world's best lightweight, high-power speaker
system" with 300 watts continuous, 1,200 watt peak power handling.
Delivers over 125 dB continuous, 131 dB peaks (1 w / 1 m) at full power.
65° x 65° Constant-directivity horn allows use vertically or horizontally
with identical coverage. Delivers better pattern control and projection
than typical 90° horns Proven, reliable EV components including DL12BFH
cast-frame 12-inch woofer and DH2010a pure titanium compression driver
Ring-Mode Decoupling (RMD) delivers unequalled vocals and pure, accurate
instruments and mids Rugged, durable polypropylene enclosure is light and
strong. Available in black or white Built-in stand mount and inserts in
enclosure allow the system to be safely suspended and arrayed using a wide
range of optional cost-effective hardware. Can also be used as a floor
monitor with F200 attachment Parallel Neutrik Speakon input connectors for
safe, loss-free connections |
|
Specifications
| Frequency Response (-3dB) |
60 - 20 Hz |
| Frequency Response (-10dB) |
42 - 20 Hz |
| Sensitivity 1W/1m |
100 dB |
| Max. SPL / 1m (calc); full space |
132 dB |
| Coverage (nominal -6dB) H° |
90 ° |
| Coverage (nominal -6dB) V° |
50 ° |
| System Power Handling
(continuous/program/peak) |
400/800/1600 Watts |
| LF Transducer |
EVS15SF |
| HF Transducer |
DH3 |
| Crossover Frequency |
1500 Hz |
| Nominal Impedance (Passive) |
8 Ohms |
| Minimum Impedance |
6.5 Ohms |
| Color |
Black |
| Color |
White |
| Flying |
Yes |
| Input Connections |
Parallel Neutrik® NL4 |
| Outdoor |
No |
| Chassis Size |
15 inches |
| Internal Crossover |
Yes |
| Speaker Type |
Fullrange, Mid-High, Two-Way,
Wedges |
| Weight Net |
20.2 kg ( 44.53 lbs ) |
| Dimensions (HxWxD) |
686 x 445 x 406 mm
(27.01" x 17.52" x 15.98") |
|
ZX4 - €1299.00
The New Generation of High Performance
Zx4 is capable as an entire system. With an integral
pole mount the Zx4 is ready for main mix applications in DJ, band and
general entertainment use. To accommodate different stage depths, Zx4
incorporates retractable monitor feet. This allows Zx4 to be used as a
stage monitor with a 45° or 55° angle.
Every detail of your music is reproduced from extended
highs to powerful lows. The DH3 compression driver with its pure titanium
diaphragm, coupled with the Zx4’s large 90° x 50° horn allows for
tremendous intelligibility and pattern control. The EVS15-SF 15" LF
delivers tight, low bass and outstanding power handling capacity.
The rugged enclosure of the Electro-Voice® Zx4 is
perfect for portable main mix and monitor applications, while the stylish
design gives it appeal in even the trendiest of environments. At only 20.2
kg (44.5 lbs), the lightweight Zx4 allows ease of transport and set up.
|
 Click here for FBT
AMICO Systems |
€2350.00
|
700W 8 Ohm - 126.5dB SPL
Full-Range Speaker System
 |
2-way bass-reflex |
|
15” neodymium woofer |
|
2” HF compression driver, |
|
60° x 40° rotable CD horn |
|
passive filter network with soft-trip HF unit protection |
|
3-ply birch trapezoidal cabinet |
|
4 x
M10 suspension points |
|
35mm ř top-hat for standpole mount |
|
flying hardware accessories |
Addressed to sound reinforcement professionals for show
productions or important permanent installations, VERVE 152 is a
high power system suitable for indoor or outdoor use granting
linear frequency response, amazing power output, clear
intelligibility |
 NEXT12HP8
( Passive loudspeakers) -
€950.00
EXT is a series of speakers which reaches the
highest standards of its class. All of the components have been designed
to obtain an exceptional sound and performance quality. Realised in
injected Polypropylene, the robust cabinet has been designed to handle any
type of stress and is both light and easy to transport. The woofer, which
features a die-cast aluminium basket has an excellent sound level due to
the use of the very light neodymium magnet (NEXT12HP4/HP8/HBA and
NEXT15HP4/HP8/HBA). All models feature an exclusive 90° x 60°constant
coverage horn which gives a precise control and constant dispersion in the
high frequencies, which are supplied by a 1” compression driver, giving a
clear, clean and well defined sound. The dedicated 12dB/oct crossover,
which features a PTC electronic protection, ensures the correct control of
the sound. The active versions are bi-amplified systems which supply the
correct power levels to the high and low frequency transducers, reducing
distortion and the power compression effect to a minimum. The amplifiers
feature thermal, DC and short circuit protection as well as sub-sonic
filters, soft start function and RF noise filters. The amplified NEXT
speakers include a pre-amplifier with three separate balanced inputs,
which allow the connection of both microphones and instruments without the
need of an external mixer. The mixed signal can then be linked out into
other NEXT speakers with the balance XLR output. A two-band equaliser,
separate line and mic volume controls and ground lift switch complete the
control panel. The ergonomic rubber handles are comfortable and the
stacking system easy to use. M8 flying points are included for suspended
installation. The trapezoidal design allows the system to be arrayed. The
speakers can be used vertically or as a floor monitor with the optional
adapter (KPTNX05 adapter available for the NEXT12 and 15). Adjustable
metal supports and eyebolts (AC169B) allow the system to be suspended.
Resistant TNT covers are available for the whole series. |
|
Proel Next 12" - €950.00
Proel Next 15" - €1275.00
|
|
 |
|
|
|
 |
TFL10P
Low-profile Flyable trapezoidal 2-way speaker system
with a 10" low frequency transducer, and 1" compression driver
with electronic protection, coupled to our SWG horn. The 10" driver
produces clear mid-bass response. This model works well as full range
unit, small floor monitor and added performance is possible when matched
with the TFL 115SP subwoofer.
Dimensions: H 52 cm, W 35.5 cm, D 31 cm |
TFL12P
Flyable trapezoidal 2-way speaker system with a
12" low frequency transducer, time aligned with a 1"
compression driver with electronic protection, coupled to our SWG horn.
The TFL12P works well as a full-range system, floor monitor and in
installations or live situations. This model is available in 4 or 8 ohm
and added performance is possible when matched with the TFL 115SP
subwoofer.
Dimensions: H 60 cm, W 40 cm, D 36.5 cm |
 |
|
 |
TFL15 P
Flyable trapezoidal 2-way speaker system with
a15" low frequency transducer with 3" voice coil, time aligned
with a 1" compression driver with electronic protection, coupled to
our SWG horn. The TFL15P gives clear and powerfull bass and will perform
well in installations, live situations and floor monitoring. This model
is available in 4 or 8 ohm and added performance is possible when
matched with the TFL 115SP or TFL 215SP subwoofer.
Dimensions: H 68 cm, W 46.5 cm, D 43 cm |
|
  |
| This compact powerhouse has been already
sold a couple of thousand times: a high-powered system
with one 12“ bass speaker and one 1“ driver with 90x60
degree CD horn, only 22kg ‘heavy’. This system
produces a very neutral, clean and direct sound with
lowest possible distortion. The ASP 12.1 combines
perfectly with our subwoofers SUB 18 (passive) or SUB 18E
(active). |
|
Sub15
| This ultra-compact 15“ subwoofer has
been newly designed.
Its high-power long-throw speaker with a 4“ voice coil and an
ultra-low resonance frequency of 38 Hz contributes to the cabinet’s
smooth and accurate bass response.
The integrated 200 Hz / 6dB low-pass cross-over allows for connection
of the SUB 15 to any full-range PA system. |
|
 |
 . . . and it’s surely not
just another plastic speaker cabinet that we are about to introduce to
you. More than that, Vector represents a complete audio concept for
versatile use - an independent professional system.
The ingredients: years of experience in building speaker cabinets and
state-of-the-art active electronics have been united for a top-notch
audio system.
Thanks to its modular concept, Vector offers advantageous solutions
for every audio task, be it for stage use or for installed sound
systems:
• Compact and lightweight active and passive systems with high
efficiency and plenty of sound pressure
• Integrated 3-channel audio mixer
• subwoofer with matched cabinet size for improved low-end response
• more plug-in modules will be introduced in the near future:
d.a.i.s.y receiver module, line delay module and 100V constant voltage
audio transformer module for installed sound systems |
|
VECTOR T3
Passive 2-way bass reflex combination with 300 W AES power handling.
12“ low frequency speaker with die cast frame and specially shaped
cone, 1“ horn/driver combination with 90 x 75 degrees coverage.
Two Speakon inputs, automatic double protection for tweeter.
|
|
 |
"With the
introduction of the Vector series, Zeck is able to offer the long
awaited alternative to other systems on the market. All-in-one
keyboard users or everybody tired of carrying heavy cabinets will
hardly find a better product to suit his needs. and if you happen to
like the "vintage" sound of the Vector cabinets you are
likely to have found your PA system."
(Tastenwelt, 6/98) |
|
|
"With its modern and
distinguished design, the VECTOR T3 is a true eye-catcher. But also
when listening to this cabinet, it quickly becomes apparent that the
VECTOR T3 represents a serious piece of equipment for contemporary
multi-purpose sound reinforcement tasks. Its plastic cabinet promises
great roadworthiness', as has already been proven by many similar
products over the last years."
(Fachblatt, Musikermagazin, 12/97) |
|
|
"pros: The
Vector T3A and S3A make a fully-fledged active processor PA system
with low space consumption and a full sound. In addition to that, the
T3A also provides great usefulness as a floor monitor, keyboard amp,
full range and line-delay cabinet. Plug-in module cavities, electronic
protection circuitry and a flexible hardware are other weighty credit
points for this handy system.
cons: The MIC/LINE input sensitivity switch
is certainly a useful feature, but simply begs to be misused. We would
have liked to see controls with larger knobs and click-action
potentiometers."
(Soundcheck, 12/98)
|
|
|
|
The
DS-8 is an ultracompact full-range system that uses an 8” low
frequency transducer with a 1.5” voice coil. The M-3 compression
driver that utilizes a 2” titanium diaphragm and 1” throat handles
high frequency reproduction.
The DS-12
incorporates a 12” low frequency transducer with a 3” voice coil.
The DS-12 shares the same M-3 high frequency compression driver as
the DS-8 but with its own proprietary crossover network and CD
horn.
The DS-15
exemplifies the achievements of D.A.S. engineers in high pressure
injection moulding technology. The DS-15 mounts a proprietary 15”
low frequency transducer with a 3” voice coil and the high
efficiency M-5 compression driver and CD horn assembly.
The
Sub-12P is a compact bass systems incorporating a 12” low
frequency transducer mounted as direct radiator in a bass-reflex
cabinet. The loudspeaker is protected by a perforated steel
grille, sealed against corrosion using a polyamide powder coat
finish. The “P” version is designed for use in bi-amped systems.
Two bar handles makes moving easy.
The
Sub-15P is a compact bass systems incorporating a 15” low
frequency transducer mounted as direct radiator in a bass-reflex
cabinet. The loudspeaker is protected by a perforated steel
grille, sealed against corrosion using a polyamide powder coat
finish. The “P” version is designed for use in bi-amped systems. A
top located pole socket permits mounting full-range systems above
the Sub-15 and two bar handles makes moving easy.
The
Sub-18F passive bass system incorporates a 18” low frequency
transducer mounted as direct radiator into a bass-reflex cabinet.
The loudspeaker is protected by a perforated steel grille, sealed
against corrosion using a polyamide powder coat finish. An
internal filter network provides a satellite output for
configuring mono-amplified three-way systems. A top located pole
socket permits mounting full-range systems above the Sub-18F and
two bar handles makes moving easy.
15"
12"
10"
10"/12"/15"